FX1N FX2N FX3U 14MR 6AD 2DA PLC RS232 RS485 Modbus RTU 24VDC for Mitsubishi PLC
Brand new X79 BTC 5 Card Slot Mining Board with E5 2630 V2 2011Pin CPU+24PIN Power Connector+RECC 4G DDR3 Memory+120G MSATA SSD
If you want to use other CPUs, please use CPUs below 2630, such as for 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2
The BTC X79 motherboard uses the H61 chip and a single-channel 2011 socket CPU; Design 5 Pcie3.0X8 graphics interface
The computing power of a single card is up to 48MH/s or more, and it perfectly supports 4G video memory graphics cards, which greatly improves the mining function of computing power.
In-line 5 card X79 (H61 chip) motherboard, support 3060 3070 3080 3080 TI graphics card! 60mm large-spacing graphics slot.
Supported CPU platform: for XEON
Chipset: for H61
Supported CPU type: E5-26XX (supports 26 series CPUs below 2630)
Supported CPU socket: 2011
Network card chip: 1*REALIEK 8105E 100M network card
Memory type: DDR3 supports desktop and server memory
Support Maximum memory capacity: 32G
Working environment: 0-95% relative humidity, non-condensing, -20°c-60°c
Memory description: Support 1066/1333/1600/1866MHz frequency
Detailed interface:
1. CPU socket: 1*LGA(2011)
2. USB port: 4*USB 2.0
3. USB pin: 1*USB 2.0
4. Hard disk interface: 1*SATA 3.0
5. Hard disk interface: 1*MSATA
6. Network card interface: 1*LAN
7. Memory slot: 1*DDR3
8. Chipset: BGA (H61)
9. BIOS initial restore: JCMOS
10. Graphics interface: 5*PCI Express 3.0 8X, pitch 60mm
11. Motherboard/graphics card power supply: 6*POWER_PE
12. Self-initiated call: AUTO_ON
Notice: Different batches of products are slightly different, and the colors of the slots and the bottom plate are random, the specified color is not accepted, thank you.
size:322x188mm
Material:PCB
colour:black
Package Contents:
1 * Motherboard
1 * CPU
1 * 24Pins Power Connector
1 * Ram memory
1 * SSD
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
|
